Audio-Technica is now shipping its ATH-ANC700BT QuietPoint over-ear wireless active noise-cancelling (ANC) headphones, which feature the company's latest advancements in ANC technology to deliver superior noise-cancelling performance and audio quality, along with improved wireless convenience.

Audio-Technica Releases Bluetooth Wireless Noise-Cancelling Headphones

The ATH-ANC700BT wireless headphones with Bluetooth technology employ a newly-developed active noise cancellation system that operates in a wider frequency range in the low through midrange frequencies than typical ANC designs, and provides a greater degree of noise cancellation. The ATH-ANC700BT also provides improved isolation for better cancellation outside the active range. This enables the headphones to have much more effective noise-cancelling performance by responding to and cancelling a wider range of outside noise.

In addition, the headphones' microphones are mounted behind the driver diaphragm. In standard ANC headphones, the mics are mounted in a location where they can unintentionally pick up some of the generated noise-cancelling signal, which is then reprocessed in a feedback loop and can limit noise reduction performance. The ATH-ANC700BT eliminates this issue by placing the ANC mics behind the driver diaphragm, which provides better noise cancellation along with improved audio quality.

The ATH-ANC700BT features a new touch and swipe control system that allows the user to intuitively answer calls, and control volume and play, pause, fast forward or rewind on Bluetooth-compatible devices. This novel design eliminates the need to search for elusive buttons and prevents accidental switch engagement when the user is handling or adjusting the headphones.

The ATH-ANC700BT employs large 40 mm drivers for powerful, wideband frequency response from 5 Hz - 40,000 Hz. The headphones support Bluetooth AAC, aptX and SBC codecs and can deliver Hi-Res Audio compliant playback from audio sources when connected with the included 3.5 mm cable. The ATH-ANC700BT provides up to 25 hours of battery life in ANC and Bluetooth mode via its USB charging port. It can also be used in wired mode if the battery runs down or to listen with a wired music source.

2 of 9

with a sleek and understated appearance, the ATH-ANC700BT is designed for comfort, featuring memory-foam padding on its large-circumference ear pads and headband and lightweight but sturdy construction. Available now in a Matte Black finish (Gray finish available in August), the ATH-ANC700BT comes with a pouch, a USB charging cable and a standard 3.9-foot (1.2m) cable with a 3.5 mm jack.

Specifications

Type: Active noise-cancellingDriver Diameter: 40 mmFrequency Response: 5 - 40,000 HzMaximum Input Power: 1,000 mW (for wired connection)Sensitivity: 98 dB/mW (when noise-cancellation used), 95 dB/mW (when noise-cancellation not used)Impedance: 150 ohms (when noise-cancellation used), 35 ohms (when noise-cancellation not used)Battery: DC 3.7 V lithium polymer rechargeable batteryBattery Life: Max. 25 hours (when Bluetooth and noise-cancellation used), Max. 30 hours (when only Bluetooth used), Max. 45 hours (when only noise-cancellation used), Max. 1,000 hours (standby)Charging Time: Approx. 5 hours (for 0-100% charge)Weight: 250 g (8.8 oz), without cableCable: Detachable 1.2 m (3.9') cableConnector: 3.5 mm (1/8") stereo mini-plug, L-shapedAccessories Included: 30 cm (1') USB charging cable, protective pouchType (Microphone): CondenserSensitivity (Microphone): -44 dB (1V/Pa at 1 kHz)Frequency Response (Microphone): 50 - 4,000 HzPolar Pattern (Microphone): OmnidirectionalInput jack: Micro USB Type BCommunication System: Bluetooth Version 4.1RF Output: 3.2 mW EIRPOutput: Bluetooth Specification Power Class 2Maximum Communication Range: Line of sight - approx. 10 m (33')Compatible Bluetooth Profiles: A2DP, AVRCP, HFP, HSPSupport Codec: aptX, AAC, SBC

Pricing And Availability

The Audio-Technica ATH-ANC700BT are available for $199.99