Follow this guide to update Samsung Galaxy Note 10.1 2014 LTE to the latest official XXUAMJ2 Android 4.3 update. This update has been released for Czech Republic region and can be updated via KIES or over-the-air. For those of our readers who want to manually update Galaxy Note 10.1 2014 LTE to XXUAMJ2 Android 4.3, this guide has all the required links and steps.

Note:this update has only been released for Samsung Galaxy Note 10.1 2014 LTE model SM-P605. You can verify your Note's model number fromSettings>About>Model Number.

Prerequisites to update Galaxy Note 10.1 2014 LTE to XXUAMJ2 Android 4.3:

Downloadand install USB drivers for Galaxy Note 10.1 2014 in your computer.Make sure to takebackupof any important files on your Note.Enable USB debugging option by pressingMenu>Settings>Applications. Navigateand tap onDeveloper Optionsto ensure thatUSB Debuggingis enabled.Ensure that your Samsung Galaxy Note 10.1 2014 LTEcarries more than 70% of charge.

How toupdate Galaxy Note 10.1 2014 LTE to XXUAMJ2 Android 4.3officialfirmware:

Required files: download the official firmware file fromhere.Extract the file and you will get atar.md5file.Also download theOdin3 v3.04 for installation fromhere.

Install Odin on your computer and launch it.Switch your Samsung Galaxy Note 10.1 P605 off and boot it inDownloadmode: press and holdVolume Down, PowerandHomebuttons together.When connected successfully, you will get a message in Odin sayingAdded!!.(In case you don’t get it, try another USB port. If that doesn't help either, then re-install USB drivers).In Odin make sure that theAuto RebootandF. Reset Timecheck boxes are the only options checked and nothing else is.Click onPDAon Odin,locate the.tar.md5file; check everything and hit theStartbutton to initiate the update process.When update installation is successfully completed,on OdinID:COMwill turn green and Odin will show you aPASSmessage.Samsung Galaxy Note 10.1 2014 will then restart and you can then disconnect yourdevicefrom computer.