Based on Android 4.4.2 KitKat AOSP, LiquidSmooth has been one of the most liked firmware in almost all the Android iterations. Smooth, stable custom firmware giving a fast experience to the users of rooted Android devices. As you can see from the list below,LiquidSmooth Android 4.4.2 KitKat custom firmwareis brimming with a ton of features that users like the most. Follow this guide toinstall LiquidSmooth Android 4.4.2 on Galaxy Tab 2 7.0 P3110.

LiquidSmooth Android 4.4.2 KitKat:

SlimPIEQuiet HoursSlim RecentsLock screen StyleNotification ReminderHardware key rebindingCustom Carrier labelSmart PulldownADB over networkGlowpad TorchAdvanced RebootListview AnimationsLiquid DungeonNational RoamingCustom Tilesflip to Mute/Reject CallIncoming call in backgroundHide USB debugging notificationStylus SupportStylus GesturesNotification Drawer StyleLock screen pin shufflerQuickUnlockStatus bar Brightness controlVolume rocker wakeSafe headset volumePrivacy GuardStatus bar clock styleStatus bar date style

Prerequisites toinstall LiquidSmooth Android 4.4.2 on Galaxy Tab 2 7.0 P3110:

Create a backup of all important data in your Galaxy device.Download and install USB drivers for Galaxy Tab 2 7.0 in your computer.Enable USB debugging option by pressingMenu>Settings>Applications. Navigate and tap onDeveloper Optionsto ensure thatUSB Debuggingis enabled.Make sure that ClockworkMod or TWRP recovery is installed - Download CWM for Tab 2 7.0 fromhere.Ensure that your Tab 2 7.0 P3110 carries more than 70% of charge.

How toinstall LiquidSmooth Android 4.4.2 on Galaxy Tab 2 7.0 P3110:

Required files:Download LiquidSmooth from here, andGoogle Appspackagefor Galaxy Tab 2 7.0 P3110 on your PC.

Connect your Galaxy Tab 2 7.0 to your computer using USB cable and copy the downloaded file to the SD card of your tablet. Make sure that you store these files in SD card root, not in any folders.

Disconnect USB and switch off yourGalaxyTab 2. Boot in to custom recovery mode by pressing and holdingVolume Downand thePowerbuttons simultaneously until the Samsung logo shows up. Leave the buttons for half a second and hold again.Alternatively you can useQuick Boot appto reboot your Android device in recovery mode.Perform the Nandroid backup of your existing ROM to be restored laterif this new ROM does not work or you want to move back. SelectBackup and Restore>Backup. Go to recovery menu after backup process is done -very important step to switch back.Now perform a full data wipe operation by going towipe data/factory reset>Yespath. Follow it by wiping cache data by selectingwipe cache partition. Perform dalvik cache wipe bygoing toadvancedand then selectingwipe dalvik cache.Go back to main recovery menu and from sd card, selectinstall zip from sdcardfollowed bychoosezip from sdcard. Locate the LiquidSmooth Android 4.4.2 custom ROMfile using theVolumekeysand select it by pressingpowerbutton. Select yes to confirm installation and wait for the ROM installation to complete successfully.Repeat the above step but select Gapps zip file this time to install in the tablet.Once the ROM is successfully flashed, go to+++++Go Back+++++and selectreboot system nowto boot up into the latest Android 4.4.2 KitKat based custom firmware.

That's it! You have successfully completed the process toinstall LiquidSmooth Android 4.4.2 on Galaxy Tab 2 7.0 P3110.