We have just shared with you the steps to updateG920FXXU1AOCV Android 5.0.2 on Samsung Galaxy S6. This is the latest official firmware available for the smartphone coming with performance stability and some battery issue fixes. Once you have updated your Galaxy S6 to the latest update, here is how rootG920FXXU1AOCV on Galaxy S6 G920F.

Prerequisites to root G920FXXU1AOCV on Galaxy S6:

Please check these prerequisites before going forward to the root steps.

Downloadand install USB drivers for Samsung Galaxy S6 in your computer.Make sure to takebackupof any important files on your smartphone.Enable USB debuggingoption by pressingMenu>Settings>Applications. Navigateand tap onDeveloper Optionsto ensure thatUSB Debuggingis enabled.Ensure that your Samsung Galaxy S6 carries more than 70% of charge.

Check and confirm your phone's model number:Go to Settings on your phone > scroll down toAbout deviceorAbout phoneand tap on it > note theModel number.This tutorial is ONLY for SM-G920F variant.

How to root G920FXXU1AOCV withCF-Auto-Root tool:

Required files:download Odin3 v3.09 for installation fromhere; also download Chainfire root tool for Samsung Galaxy S6 from this linkand extract the zip

Here are the steps to rootG920FXXU1AOCV onGalaxy S6 G920F 5.0.2 Lollipop.

Unzip Odin on your computer and install it.Unzip Chainfire zip file and retrieve the contents on your computer.Switch your phone off and enter into download mode: press and hold Volume Down + Home buttons simultaneously and then press the Powerkey till you see the construction Android robot sign. Press Powerkey again to confirm. OR, checkhow to enter Galaxy S6 download mode.Open ODIN on your computer and connect your Samsung Galaxy S6 SM-G920F with your PC while it's in Download mode.When connected successfully, you will get a message in Odin sayingAdded!!.(In case you don’t get it, try another USB port. If that doesn't help either, then re-install USB drivers).In ODIN, click on thePDAbutton and select the CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5file downloaded earlier.Ensuring thatAuto Reboot and F. Reset Timeareselected, click onStartto initiate the root process.When the root process is successfully completed, you will get aPASSmessage and ID:COM will turn green.Once your device automatically reboots in to Recovery mode and you see the home screen, you can disconnect yourSamsung Galaxy S6.

Note:Incase your device gets stuck at boot screen after installation and does not boot into recovery mode, you will have to do the entire procedure once again.

-Fix Samsung Galaxy S6 and S6 Edge Battery Drain Issues