Update your Samsung Galaxy Note N7000 to the very latest XXLT5 Android 4.1.2 Jelly Bean official firmware update. Yep, the OS updates season looks really on! Follow this simple guide to update Galaxy Note N7000 to XXLT5 Android 4.1.2 Jelly Bean!

Also, Read

Guide to Root XXLT5 Android 4.1.2 Jelly Bean Official firwmare on Samsung Galaxy Note N7000

Android 4.1.2 XXLT5 firmware details:

PDA: N7000XXLT5

CSC: N7000OXXLT2

Version: 4.1.2

Date: May, 2013

Prerequisites to check before you update Galaxy Note N7000 to XXLT5 Android 4.1.2 Jelly Bean official firmware:

Downloadand install USB drivers for Galaxy Note N7000 in your computer.Enable USB debugging option by pressingMenu>Settings>Applications. Navigateand tap onDeveloper Optionsto ensure thatUSB Debuggingis enabled.Make sure that ClockworkMod recovery is installed.Ensure that your Samsung Galaxy Note N7000 carries more than 70% of charge.

How to update Galaxy Note N7000 to XXLT5 Android 4.1.2 Jelly Bean:

Required files: downloadAndroid 4.1.2 Jelly Bean N7000XXLT5andOdin 3.07. Extract the firmware zip file to get a file with.tarextension. Also, extract the Odin zip file to get the Odin v3.07 exe file.

Turn your Galaxy Note off and make sure to wait 5-6 seconds to confirm complete shut down of the phone.Boot your Galaxy Note N7000 smartphone into Download Mode:press and hold the Volume Down,Home and the Power button, until the screen shows the Samsung Logo. After a few seconds, your Note will enter download mode.Run Odin3 exe with Administrator rights on your computer.Connect your Note N7000 with your PC using a data cable. Once the device is successfully connected, you will see a notification in Odin in the bottom left saying Added!! -if for some reason, you do not see the said notification, try another USB port.Also, check for ID:COM port being depicted by a number in yellowto make sure that you have successfully added your device.Select the following files in Odin at their respective tabs from extractedXXLT5firmware folder:Click the PDAbutton to select the .tar file extracted earlier.Click the Phonebutton, and select file with *modem* in its name (ignore, if this file does not file exist).Next, click the CSCbutton, and select file with *csc* in its name (ignore, if this file does not file exist).Click the PITbutton to select the .pit file.(ignore, if this file does not file exist).Ensure that Auto RebootandF. Reset Timeare the only options selected inOdin window. Also ensure to select Re-Partition checkbox only if you are using a .pit file.Double check everything and then hit the STARTbutton to begin the flashing process. Once the flashing process is completed successfully, your Notewill automatically reboot and you will see a PASS notification in the top-left-most box.You can now disconnect your device from the computer.

Your Galaxy Note N7000 is successfully updated to XXLT5 Android 4.1.2 Jelly Bean official firmware update.