Galaxy S3 I9300 can now be updated toZNEMB1 Android 4.1.2 Jelly Bean official firmware update. It is currently being rolled out in China and supports many regions and carriers. But if you choose to manually download and update it then follow our step by step tutorial to easily update your Galaxy S3 to this official firmware update based on Android 4.1.2 Jelly Bean.

Some features of the ZNEMB1 Official Android 4.1.2 update include:

Multi-view featurePage BuddyNew Gallery app,Group Cast & Paper Artist apps (from Galaxy Note)Customisable notification panel and smart rotationSwipe and Android 4.2 Keyboard

Prerequisitesbefore you update Galaxy S3 to ZNEMB1 Android 4.1.2 Jelly Bean official firmware:

Create a backup of all important data in your Galaxy device.Download and install USB drivers for Galaxy S3 I9300 in your computer.Enable USB debugging option by pressingMenu>Settings>Applications. Navigate and tap onDeveloper Optionsto ensure thatUSB Debuggingis enabled.This tutorial uses ODIN utility which works only on Windows OS. If you use Mac OS or Linux OS (such as Ubuntu) then please use cross platform toolHeimdallto flash this firmware.Ensure that your S3 I9300 carries more than 80% of charge.

Update your Galaxy S3 to ZNEMB1 Android 4.1.2 Jelly Bean official firmware:

Required files: DownloadI9300ZNEMB1 Jelly Bean Officialfile & the latest ODIN Software.

Switch your Galaxy S3 off and wait for a few seconds for the vibration to confirm it is completely switched off.Boot your Galaxy I9300 phone inDownload Modeby pressing and holdingvolume downandhomebuttons simultaneously until phone reboots with a warning screen. Then it will boot into the download mode.Run Odin file as an Administrator (adminprivilegesare required) on your computer and connect your device with computer using the USB cable while your device is in Download mode. A message "Added!!" will show up on ODIN message box. In case you don't get the message, try another USB port. You should also see COM port with a number in Yellow if you have successfully added the S3 I9300 device.Select these files now from the downloaded firmware folder in ODIN under the respective buttons:Click on thePDAbutton to select the file with*code*appearing in its name.Click thePhonebutton and select file with*modem*in its name (ignore if there is no such file)Click on theCSCButton to select the file with*csc*in its name (leave if there is no such file)Click on thePITButton to select the.pitfile. Use only if you got it while extracting in step 1 above, otherwise ignore it.Now in the ODIN window, ensure thatAuto RebootandF.Reset Timecheck-boxes are selected. If you are using.pitfile then also make sure to check theRe-Partitioncheck-box.Please double check everything mentioned in the last 2 steps and press theSTARTbutton which will begin the rooting process. The rooting process might take long and would restart automatically once the installation is done and you will see aPASSmessage in the Odin window.Switch your tablet off again and enter into the recovery mode using Volume Up, Home and Power buttons.Using the volume buttons navigate towipe data/factory resetand select it.Selectreboot system nowand wait for S3 to boot again.

Your device should now be running theZNEMB1 Android 4.1.2 Jelly Bean official firmware. To ensure check in theSettings>About Phone.